Zum Lingeshof 3
36124 Eichenzell
Tel. +49 6659 98794-0
Fax. +49 6659 98794-44
E-Mail: info@walcher.com
Watch16Com
 | |
 |
A flexible communication module is provided with the Watch16Com for versatile tasks.
No specific equipment software is required for the programming. The programming is carried out via your Internet browser!
Up to 16 signals can be binarily coded and their state monitored. The limit values of two analogue signals can be monitored.
The 4 physical binary inputs can be respectively connected with 3 different signal forms. Thus either potential free contacts or voltage between 5V and 30V DC can be used or sensors with open collectors.
The Watch16 Com can also transmit warning or security functions from any place via a GSM radio modem.
One of the two Com ports is provided for communicating with a PLC via the protocol of Siemens 3964 and Moeller Suconet-K.
New, test it online
under Watch16com Online you can test a Watch16 com online (german version) !
Technical data
Operating system: |
Embedded Linux |
Supply voltage: |
230V 50-60Hz (+/-10%) or |
|
115V 50-60Hz (+/-10%) or |
|
24V DC oder 12V DC |
Inputs: |
4St. In 3 Varianten nutzbar, |
|
potenzialfreier Kontakt, |
|
S0- Schnittstelle oder |
|
Spannungsimpulseingang 5-30V DC. |
Analogue inputs: |
2St. 0..10V DC potenzialgetrennt |
Optional
LAN-Interface: |
Ethernet-Connection utilizable as configuration and information interface |
|
|
Outputs : |
2-4 realy contacts |
